(Available Right or Left Hand Draw Side)
Our new tuckable holster modification is designed so that the side of the holster facing outwards towards the waistband has an additional flap which enables the user to tuck their shirt between the outside of the holster and the inside of the flap. The holster waistband side has a soft (loop) velcro covering. The flap holster side has the denier covering like the inside of the holster. The outside of the flap waistband side has the non-slip rubber which enables the concealed carrier to prevent from over tucking the shirt and pulling their shirt out with any drag. The holster also comes with a detachable Kydex clip to aid in putting on the holster.
(See Installation Instructions Below)
TUCKABLE HOLSTER INSTALLATION INSTRUCTIONS
When installing the Tuckable Holster the
removable clip can be used an aid for installing the holster. After
having chosen your carry position, start tucking your shirt in the
opposite side of the strong side around the waist band. Clip the holster
and gun to your waist band to help hold the gun while tucking the shirt
in between the flap and the holster. After a few times of installing
the holster I found, and you may find also, that you will not need the
clip to install the Tuckable Holster. However you can also leave the
clip on if you choose. I suggest to hook between the waist band and belt
this way it will be the least visible. After your shirt is tucked
shallow in the holster, around 2", button or snap your waist band,
tighten your belt if wearing one to a comfortable amount of
tightness to give enough compression to keep the holster in place. At
this time if you do not want to keep the clip on the holster stick your
finger in your waist band between the clip and the holsters flap
and pop the clip off.
PO Box 30125
Tucson, AZ 85751
sales@securityarms.com
Shop hours are by appointment only.
Phone 8:00AM - 5:00PM Pacific Standard time at 520-529-6137